1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
|
// **********************************************************************************
// Driver definition for HopeRF RFM69W/RFM69HW/RFM69CW/RFM69HCW, Semtech SX1231/1231H
// **********************************************************************************
// Copyright LowPowerLab LLC 2018, https://www.LowPowerLab.com/contact
// **********************************************************************************
// License
// **********************************************************************************
// This program is free software; you can redistribute it
// and/or modify it under the terms of the GNU General
// Public License as published by the Free Software
// Foundation; either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will
// be useful, but WITHOUT ANY WARRANTY; without even the
// implied warranty of MERCHANTABILITY or FITNESS FOR A
// PARTICULAR PURPOSE. See the GNU General Public
// License for more details.
//
// Licence can be viewed at
// http://www.gnu.org/licenses/gpl-3.0.txt
//
// Please maintain this license information along with authorship
// and copyright notices in any redistribution of this code
// **********************************************************************************
#include <stdlib.h>
#include <avr/io.h>
#include <util/delay.h>
#include "radio.h"
#include "serial.h"
#define SPI_SS PB2
#define SPI_SCK PB5
#define SPI_MISO PB4
#define SPI_MOSI PB3
#define SPI_DDR DDRB
#define SPI_PORT PORTB
#define MAX_POWER_LEVEL 23
static inline uint8_t read_reg(uint8_t reg)
{
SPI_PORT &= ~(1 << SPI_SS);
SPDR = reg & 0x7F;
while (!(SPSR & (1 << SPIF)))
;
SPDR = 0;
while (!(SPSR & (1 << SPIF)))
;
SPI_PORT |= (1 << SPI_SS);
return SPDR;
}
static inline void write_reg(uint8_t reg, uint8_t val)
{
SPI_PORT &= ~(1 << SPI_SS);
SPDR = reg | 0x80;
while (!(SPSR & (1 << SPIF)))
;
SPDR = val;
while (!(SPSR & (1 << SPIF)))
;
SPI_PORT |= (1 << SPI_SS);
}
static inline void set_power_level(uint8_t pwl)
{
uint8_t pa_mask;
if (pwl < 16) {
pwl += 16;
pa_mask = 0x40;
} else {
pwl += pwl < 20 ? 10 : 8;
pa_mask = 0x40 | 0x20;
}
write_reg(0x5A, 0x5D);
write_reg(0x5C, 0x7C);
write_reg(0x11, (pa_mask | pwl));
}
void radio_sendto(uint8_t addr, const char *data, uint8_t n)
{
uint8_t i;
// force the receiver into WAIT mode
write_reg(0x3D, ((read_reg(0x3D) & 0xFB) | 0x04));
// STDBY + ListenAbort
write_reg(0x01, 0x04);
while ((read_reg(0x27) >> 7) != 1)
;
SPI_PORT &= ~(1 << SPI_SS);
SPDR = 0x00 | 0x80;
while (!(SPSR & (1 << SPIF)))
;
for (i = 0; i < n; i++) {
SPDR = data[i];
while (!(SPSR & (1 << SPIF)))
;
}
SPI_PORT |= (1 << SPI_SS);
write_reg(0x01, 0x0C);
while (!read_reg(0x28))
;
write_reg(0x01, 0x04);
while ((read_reg(0x27) >> 7) != 1)
;
// todo: do a more reliable check
_delay_ms(10);
// ListenOn
write_reg(0x01, (read_reg(0x01) | 0x40));
}
uint8_t radio_recv(char *buf, uint8_t n)
{
uint8_t read_len;
read_len = 0;
if ((read_reg(0x28) & 0x04))
{
write_reg(0x01, 0x04);
while ((read_reg(0x27) >> 7) != 1)
;
SPI_PORT &= ~(1 << SPI_SS);
SPDR = 0x00 | 0x7F;
while (!(SPSR & (1 << SPIF)))
;
while (read_len < n) {
SPDR = 0;
while (!(SPSR & (1 << SPIF)))
;
buf[read_len++] = SPDR;
}
SPI_PORT |= (1 << SPI_SS);
}
return read_len;
}
void radio_init(struct radio_cfg *cfg)
{
SPI_DDR |= (1 << SPI_SS) | (1 << SPI_SCK) | (1 << SPI_MOSI);
SPI_PORT |= (1 << SPI_SS);
SPCR |= (1 << SPE) | (1 << MSTR);
// todo: do we need this?
do {
write_reg(0x2F, 0xAA);
} while (read_reg(0x2F) != 0xAA);
do {
write_reg(0x2F, 0x55);
} while (read_reg(0x2F) != 0x55);
write_reg(0x01, 0x04);
write_reg(0x02, 0x00);
write_reg(0x03, 0x02);
write_reg(0x04, 0x40);
write_reg(0x05, 0x03);
write_reg(0x06, 0x33);
// carrier frequency: 433MHz
write_reg(0x07, 0x6C);
write_reg(0x08, 0x40);
write_reg(0x09, 0x00);
write_reg(0x19, (0x40 | 0x00 | 0x02));
// DIO mapping
write_reg(0x25, 0x40);
write_reg(0x26, 0x07);
write_reg(0x28, 0x10);
write_reg(0x29, 220);
// sync value
write_reg(0x2E, (0x80 | 0x08));
write_reg(0x2F, 0x2D);
write_reg(0x30, cfg->network_id);
// packet format and FIFO thresholds
write_reg(0x37, (0x80 | 0x10));
write_reg(0x38, 66);
write_reg(0x3C, (0x80 | 0x0F));
write_reg(0x3D, 0x10);
write_reg(0x6F, 0x30);
// disable encryption
write_reg(0x3D, ((read_reg(0x3D) & 0xFE) | 0x00));
// enable high power amps
write_reg(0x13, 0x0F);
set_power_level(MAX_POWER_LEVEL);
write_reg(0x01, ((read_reg(0x01) & 0xE3) | 0x04));
while (!(read_reg(0x27) & 0x80))
;
}
|
