blob: 70496d53dad14634383a904b5ec2c3b2f99857c1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
|
CURRENT MEASUREMENTS
R503 FPM:
When VCC is connected to a 3.31V supply, FPM draws 13.8mA of quiescent current. When
VCC is disconnected (3.3VT connected to 3.31V supply), it draws 2.9uA.
ATmega328P:
MOSFET:
FS5106B high-torque servo:
One of them draws 6.1mA when connected and stabilizes at 4.6mA. The other drew
variable amounts initially (4.7mA, 5mA+, but mostly 4.7). Both draw 4.6mA of
quiescent current with a 5.07V supply.
REMARKS
1. Can't use the 3.3V FPM modules with Arduino Uno. The RX and TX lines have
resistors.
2. When ATmega328P is in power down mode, the MCU + FPM + Servo + linear
regulators draw 30.6mA of quiescent current at 5.07V.
|
