1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
#include <stdio.h>
#include <stdlib.h>
#include <avr/io.h>
#include <util/delay.h>
#include "uart.h"
#define SPI_SS PB2
#define SPI_SCK PB5
#define SPI_MISO PB4
#define SPI_MOSI PB3
#define SPI_DDR DDRB
#define SPI_PORT PORTB
#define NRF_IRQ PD7
#define NRF_CE PB1
#define NRF_CE_DDR DDRB
#define NRF_CE_PORT PORTB
#define NRF_NOP 0xFF
#define NRF_R_REGISTER 0x1F
#define NRF_W_REGISTER 0x20
#define LEN(a) (sizeof(a) / sizeof(a[0]))
const char *bittab[16] = {
[ 0] = "0000", [ 1] = "0001", [ 2] = "0010", [ 3] = "0011",
[ 4] = "0100", [ 5] = "0101", [ 6] = "0110", [ 7] = "0111",
[ 8] = "1000", [ 9] = "1001", [10] = "1010", [11] = "1011",
[12] = "1100", [13] = "1101", [14] = "1110", [15] = "1111",
};
static inline uint8_t read_reg(uint8_t reg)
{
SPI_PORT &= ~(1 << SPI_SS);
SPDR = reg & NRF_R_REGISTER;
while (!(SPSR & (1 << SPIF)))
;
SPDR = NRF_NOP;
while (!(SPSR & (1 << SPIF)))
;
SPI_PORT |= (1 << SPI_SS);
return SPDR;
}
static inline void write_reg(uint8_t reg, uint8_t val)
{
SPI_PORT &= ~(1 << SPI_SS);
SPDR = (reg & 0x1F) | NRF_W_REGISTER;
while (!(SPSR & (1 << SPIF)))
;
SPDR = val;
while (!(SPSR & (1 << SPIF)))
;
SPI_PORT |= (1 << SPI_SS);
}
static inline void read_reg_bulk(uint8_t reg, uint8_t *data, uint8_t n)
{
uint8_t i;
SPI_PORT &= ~(1 << SPI_SS);
SPDR = reg & NRF_R_REGISTER;
while (!(SPSR & (1 << SPIF)))
;
for (i = 0; i < n; i++) {
SPDR = NRF_NOP;
while (!(SPSR & (1 << SPIF)))
;
data[i] = SPDR;
}
SPI_PORT |= (1 << SPI_SS);
}
static inline void write_reg_bulk(uint8_t reg, uint8_t *data, uint8_t n)
{
uint8_t i;
SPI_PORT &= ~(1 << SPI_SS);
SPDR = (reg & 0x1F) | NRF_W_REGISTER;
while (!(SPSR & (1 << SPIF)))
;
for (i = 0; i < n; i++) {
SPDR = data[i];
while (!(SPSR & (1 << SPIF)))
;
}
SPI_PORT |= (1 << SPI_SS);
}
static inline void print_config(void)
{
char s[22];
uint8_t i, rv;
uint8_t regs[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
};
uart_write_line("NRF24L01 configuration:");
for (i = 0; i < LEN(regs); i++) {
rv = read_reg(i);
snprintf(s, LEN(s), "\t0x%02X: 0x%02X %s%s",
regs[i], rv, bittab[rv >> 4], bittab[rv & 0x0F]);
uart_write_line(s);
}
//snprintf(s, (sizeof()))
}
void radio_init()
{
SPI_DDR |= (1 << SPI_SS) | (1 << SPI_SCK) | (1 << SPI_MOSI);
SPI_PORT |= (1 << SPI_SS);
SPCR |= (1 << SPE) | (1 << MSTR);
NRF_CE_DDR |= (1 << NRF_CE);
NRF_CE_PORT &= ~(1 << NRF_CE);
_delay_ms(110); /* power on reset delay */
write_reg(0x00, 0b00001100); /* set 2-byte CRC */
write_reg(0x01, 0b00111111); /* enable auto ack on all pipes */
write_reg(0x02, 0b00000001); /* enable rx address on pipe 0 */
write_reg(0x03, 0b00000001); /* set address width to 3 bytes */
write_reg(0x04, 0b00101111); /* 750uS retransmission delay, 15 tries */
write_reg(0x05, 0b01110011); /* use 2.515GHz channel */
write_reg(0x06, 0b00001110); /* set data rate to 1Mbps */
write_reg(0x07, 0b01110000); /* clear rx, tx, max_rt interrupts */
//write_reg_bulk(0x0A, rxaddr, LEN(rxaddr));
}
int main(void)
{
uart_init();
radio_init();
print_config();
return 0;
}
|
