1 files changed, 99 insertions, 0 deletions
diff --git a/main.c b/main.c
new file mode 100644
index 0000000..bfebf23
--- /dev/null
+++ b/main.c
@@ -0,0 +1,99 @@
+/*
+ * example_usage.c
+ *
+ */ 
+
+#define bit_clr(a,b) ((a) &=~(1<<(b)))
+#define bit_set(a,b) ((a) |= (1<<(b)))
+#define bit_tst(a,b) ((a) & (1<<(b)))
+#define bit_change(a,b) ((a) ^= (1<<(b)))
+
+#include <stdio.h>
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+
+#define Soft_UART_TX_PORT PORTD
+#define Soft_UART_TX_DDR DDRD
+#define Soft_UART_TX_PIN 3
+#define Soft_UART_Baud 9600
+#include "Soft_UART_Timer1.h"
+
+#include "fpm.h"
+
+static inline void uart_write(const char *s)
+{
+	for (; *s; s++) {
+		Soft_UART_send_byte(*s);
+	}
+	Soft_UART_send_byte('\r');
+	Soft_UART_send_byte('\n');
+}
+
+int main(void)
+{
+	const int SLEN = 25;
+
+	char s[SLEN];
+	struct fpm_config cfg;
+
+	cli();
+	Soft_UART_init();
+	bit_set(DDRB,5);
+	sei();
+
+	if (fpm_init())
+		uart_write("FPM detected");
+	else
+		uart_write("FPM not detected");
+
+	if (fpm_get_config(&cfg)) {
+		uart_write("FPM config:");
+		snprintf(s, SLEN, "\tstatus: 0x%02X", cfg.status);
+		uart_write(s);
+		snprintf(s, SLEN, "\tsysid: 0x%02X", cfg.sysid);
+		uart_write(s);
+		snprintf(s, SLEN, "\tcap: %d", cfg.cap);
+		uart_write(s);
+		snprintf(s, SLEN, "\tsec: %d", cfg.sec_level);
+		uart_write(s);
+		snprintf(s, SLEN, "\taddr: 0x%02X%02X%02X%02X", cfg.addr[0], 
+			cfg.addr[1], cfg.addr[2], cfg.addr[3]);
+		uart_write(s);
+		snprintf(s, SLEN, "\tpkt size: %d", cfg.pkt_size);
+		uart_write(s);
+	
+		if (cfg.baud == 1)
+			uart_write("\tbaud: 9600");
+		else if (cfg.baud == 2)
+			uart_write("\tbaud: 19200");
+		else if (cfg.baud == 3)
+			uart_write("\tbaud: 28800");
+		else if (cfg.baud == 4)
+			uart_write("\tbaud: 38400");
+		else if (cfg.baud == 5)
+			uart_write("\tbaud: 48000");
+		else if (cfg.baud == 6)
+			uart_write("\tbaud: 57600");
+		else if (cfg.baud == 7)
+			uart_write("\tbaud: 67200");
+		else if (cfg.baud == 8)
+			uart_write("\tbaud: 76800");
+		else if (cfg.baud == 9)
+			uart_write("\tbaud: 86400");
+		else if (cfg.baud == 10)
+			uart_write("\tbaud: 96000");
+		else if (cfg.baud == 11)
+			uart_write("\tbaud: 105600");
+		else if (cfg.baud == 12)
+			uart_write("\tbaud: 115200");
+	}
+	
+    while (1) 
+    {	
+		_delay_ms(1000);
+    }
+
+	return 0;
+}