Experimental e-reader

EXPERIMENTAL E-READER

24 OCTOBER 2023

-
-

This project features an experimental e-reader powered by an ESP-WROOM-32 -development board and a 7.5-inch Waveshare -e-paper display built with the intention of learning about e-paper displays.

- -

Introduction

- -

The prototype e-reader comprises an ESP32 microcontroller, an e-paper display -HAT, and three buttons: yellow, blue, and white for turning the page backwards, -forwards, and putting the device to sleep, respectively. The prototype does not -store books on the microcontroller. It streams books from a server over HTTP. -The e-reader employs RTC memory to record the reading progress between -sessions.

- -

The most formidable challenge when trying to build an e-reader with an ESP32 is -its limited memory and storage. My ESP-WROOM-32 has a total of 512KB of SRAM -and 4MB of flash memory, which the freeRTOS, ESP-IDF, and the e-reader -application must share. To put things into perspective, a Kindle Paperwhite has -at least 256MB of memory and 8GB of storage. That is 500x more memory than what -I’d have to work with.

- -

Despite its size, as microcontrollers go, ESP32 is a powerful system-on-a-chip -with a 160MHz dual-core processor and integrated WiFi. So, I thought it’d be -amusing to embrace the constraints and build my e-reader using a $5 MCU and the -power of C programming.

- -

The file format

- -

The file format dictates the complexity of the embedded software. So, I’ll -begin there. The e-reader works by downloading and rendering a rasterized -monochrome image of a page (a .ebm file).

- -

The EBM file contains a series of bitmaps, one for each page of the book. The -dimensions of each bitmap are equal to the size of the display. Each byte of -the bitmap encodes information for rendering eight pixels. For my display, -which has a resolution of 480x800, the bitmaps are laid out along 48KB -boundaries. This simple file format lends well to HTTP streaming, which is its -main advantage, as we will soon see.

- -

The pdftoebm.py script enclosed in the tarball at the end of the page converts -PDF documents to EBM files.

- -

How does it work?

- -

As the e-reader has no storage, it can’t store books locally. Instead, it -downloads pages of the EBM file over HTTP from the location pointed to by the -EBM_ARCH_URL setting in the Kconfig.projbuild file on demand. To read a -different book, we have to replace the old file with the new one or change the -EBM_ARCH_URL value. The latter requires us to recompile the embedded -software.

- -

Upon powering up, the e-reader checks the reading progress stored in the RTC -memory. It then downloads three pages (current, previous, and next) to a -circular buffer in DMA-capable memory. When the user turns a page by pressing a -button, one of the microprocessor’s two cores transfers it from the buffer to -the display over a Serial Peripheral Interface (SPI). The other downloads a new -page in the background. I used the ESP-IDF task API to schedule the two tasks -on different cores of the multicore processor to make the reader more -responsive.

- -

I designed the EBM format with HTTP streaming in mind. Since the pages are laid -out in the EBM file along predictable boundaries, the e-reader can request -pages by specifying the offset and the chunk size in the HTTP Range header. Any -web server will process this request without custom logic.

- -

Epilogue

- -

My fascination with e-paper began back in 2017, when I was tasked with -installing a few displays in a car park. Having no idea how they worked, I -remember watching the languid screens refresh like a Muggle witnessing magic. -This project was born out of that enduring curiosity and love of e-paper -technology.

- -

Why did I go to the trouble of building a rudimentary e-reader when I could -easily buy a more capable commercial e-reader? First of all, it’s to prove to -myself that I can. More importantly, there’s a quiet satisfaction to reading on -hardware you built yourself. You are no longer the powerless observer watching -the magic happen from the sidelines. You become the wizard who makes the -invisible particles swirl into form by whispering C to them. There’s only one -way to experience that.

- -

Files: source.tar.gz

by W. D. Sadeep Madurange