From 752a06ec0ebf20d6232b13f1ea53fe21fefcefbd Mon Sep 17 00:00:00 2001 From: Sadeep Madurange Date: Mon, 8 Dec 2025 17:34:35 +0800 Subject: Fix list indentation. --- _site/blog/arduino-uno/3v3.Makefile | 46 +++++++++++ _site/blog/arduino-uno/Makefile | 43 ++++++++++ _site/blog/arduino-uno/breadboard.jpeg | Bin 0 -> 54319 bytes _site/blog/arduino-uno/index.html | 139 +++++++++++++++++++++++++++++++++ _site/blog/arduino-uno/pinout.png | Bin 0 -> 247197 bytes 5 files changed, 228 insertions(+) create mode 100644 _site/blog/arduino-uno/3v3.Makefile create mode 100644 _site/blog/arduino-uno/Makefile create mode 100644 _site/blog/arduino-uno/breadboard.jpeg create mode 100644 _site/blog/arduino-uno/index.html create mode 100644 _site/blog/arduino-uno/pinout.png (limited to '_site/blog/arduino-uno') diff --git a/_site/blog/arduino-uno/3v3.Makefile b/_site/blog/arduino-uno/3v3.Makefile new file mode 100644 index 0000000..4ca89d4 --- /dev/null +++ b/_site/blog/arduino-uno/3v3.Makefile @@ -0,0 +1,46 @@ +CC = avr-gcc +MCU = atmega328p +PORT = /dev/cuaU0 +TARGET = app + +SRC = main.c +OBJ = $(SRC:.c=.o) + +CFLAGS = -std=gnu99 +CFLAGS += -Os +CFLAGS += -Wall +CFLAGS += -mmcu=$(MCU) +CFLAGS += -DBAUD=57600 +CFLAGS += -DF_CPU=8000000UL +CFLAGS += -ffunction-sections -fdata-sections + +LDFLAGS = -mmcu=$(MCU) +LDFLAGS += -Wl,--gc-sections + +HEX_FLAGS = -O ihex +HEX_FLAGS += -j .text -j .data + +AVRDUDE_FLAGS = -p $(MCU) +AVRDUDE_FLAGS += -c arduino +AVRDUDE_FLAGS += -b 57600 +AVRDUDE_FLAGS += -P $(PORT) +AVRDUDE_FLAGS += -D -U + +%.o: %.c + $(CC) $(CFLAGS) -c -o $@ $< + +elf: $(OBJ) + $(CC) $(LDFLAGS) $(OBJ) -o $(TARGET).elf + +hex: elf + avr-objcopy $(HEX_FLAGS) $(TARGET).elf $(TARGET).hex + +upload: hex + avrdude $(AVRDUDE_FLAGS) flash:w:$(TARGET).hex:i + +.PHONY: clean + +clean: + rm -f *.o *.elf *.hex + + diff --git a/_site/blog/arduino-uno/Makefile b/_site/blog/arduino-uno/Makefile new file mode 100644 index 0000000..9db7b09 --- /dev/null +++ b/_site/blog/arduino-uno/Makefile @@ -0,0 +1,43 @@ +CC = avr-gcc +MCU = atmega328p +PORT = /dev/cuaU0 +TARGET = app + +SRC = main.c +OBJ = $(SRC:.c=.o) + +CFLAGS = -std=gnu99 +CFLAGS += -Os +CFLAGS += -Wall +CFLAGS += -mmcu=$(MCU) +CFLAGS += -DBAUD=115200 +CFLAGS += -DF_CPU=16000000UL +CFLAGS += -ffunction-sections -fdata-sections + +LDFLAGS = -mmcu=$(MCU) +LDFLAGS += -Wl,--gc-sections + +HEX_FLAGS = -O ihex +HEX_FLAGS += -j .text -j .data + +AVRDUDE_FLAGS = -p $(MCU) +AVRDUDE_FLAGS += -c arduino +AVRDUDE_FLAGS += -P $(PORT) +AVRDUDE_FLAGS += -D -U + +%.o: %.c + $(CC) $(CFLAGS) -c -o $@ $< + +elf: $(OBJ) + $(CC) $(LDFLAGS) $(OBJ) -o $(TARGET).elf + +hex: elf + avr-objcopy $(HEX_FLAGS) $(TARGET).elf $(TARGET).hex + +upload: hex + avrdude $(AVRDUDE_FLAGS) flash:w:$(TARGET).hex:i + +.PHONY: clean + +clean: + rm *.o *.elf *.hex diff --git a/_site/blog/arduino-uno/breadboard.jpeg b/_site/blog/arduino-uno/breadboard.jpeg new file mode 100644 index 0000000..bd74907 Binary files /dev/null and b/_site/blog/arduino-uno/breadboard.jpeg differ diff --git a/_site/blog/arduino-uno/index.html b/_site/blog/arduino-uno/index.html new file mode 100644 index 0000000..7c4a71b --- /dev/null +++ b/_site/blog/arduino-uno/index.html @@ -0,0 +1,139 @@ + + + + + How to configure ATmega328P microcontrollers to run at 3.3V and 5V + + + + + How to configure ATmega328P microcontrollers to run at 3.3V and 5V + + + + + + + + + + + + + +
+
+
+

HOW TO CONFIGURE ATMEGA328P MICROCONTROLLERS TO RUN AT 3.3V AND 5V

+
10 APRIL 2025
+
+

This is a quick reference for wiring up ATmega328P ICs to run at 5V and 3.3V. +While the 5V configuration is common, the 3.3V configuration can be useful in +low-power applications and when interfacing with parts that themselves run at +3.3V. In this guide, the 5V setup is configured with a 16MHz crystal +oscillator, while the 3.3V configuration makes use of an 8MHz crystal +oscillator.

+ +

The steps that follow refer to the following pinout.

+ + + + + + +
+ Pinout +

Pinout

+ 		+ Circuit +

Breadboard

+
+ +

5V-16MHz configuration

+ +

Powering ATmega328P microcontrollers with 5V is the most common setup. This is +also how Arduino Uno boards are wired.

+ +

In this configuration, the microcontroller’s pin 1 is connected to 5V via a +10kΩ resistor. Pins 9 and 10 are connected to a 16MHz crystal oscillator via +two 22pF capacitors connected to ground. The microcontroller is powered by +connecting pins 7, 20, and 21 to a 5V DC power supply. Lastly, pins 8 and 22 +are connected to ground. In addition to the these connections, which are +required, it’s a good idea to add 0.1μF decoupling capacitors between pins 7, +20, and 21 and ground.

+ +

Here’s a sample Makefile for compiling C programs for ATmega328P +microcontrollers using avr-gcc/avrdude toolchain.

+ +

3.3V-8MHz configuration

+ +

Electrical connections for running an ATmega328P at 3.3V are identical to that +of the 5V circuit. The only differences are that all the 5V connections are +replaced with a 3.3V power source and a 8MHz crystal oscillator takes the place +of the 16MHz crystal.

+ +

However, standard ATmega328P chips are preconfigured to run at 5V. To run one +at 3.3V, we must first modify its fuses that control characteristics like the +BOD level. If a bootloader that expects a 16MHz clock (e.g., Arduino +bootloader) is pre-installed on the ATmega328P, it must be swapped with one +that accepts an 8MHz clock. To accomplish that, we need an in-system programmer +(ISP).

+ +

Fortunately, we can turn an ordinary Arduino Uno board into an ISP by uploading +the ‘ArduinoISP’ sketch found in the Arduino IDE. The ISP communicates with the +microcontroller using a Serial Peripheral Interface (SPI). So, connect the SPI +port of the ATmega328P to that of the Arduino Uno, and the Uno’s SS pin +to the ATmega328P’s RESET pin.

+ +

Power up the the ATmega328P by connecting its VCC to a 5V supply (we +can use Arduino Uno’s 5V pin). From the Arduino IDE, select ‘ATmega328P (3.3V, +8MHz)’ for processor from the tools menu. Also from the tools menu, select +‘Arduino as ISP’ as programmer. Finally, upload the new bootloader by selecting +‘Burn Bootloader’ from the tools menu.

+ +

The ATmega328P is now ready to run at 8MHz with a 3.3V power supply. You can +upload programs to the ATmega328P as you normally would using avrdude. +Here’s a sample Makefile with adjusted parameters (e.g., baud +rate) for an 8MHz clock.

+ +

Remarks

+ +

In both configurations, if you intend to use the ATmega328P’s analog-to-digital +converter with the internal 1.1V or AVcc voltage as reference, do +not connect AREF (pin 21) to Vcc. Refer to section 23.5.2 in the +datasheet for more information.

+ +
+

by W. D. Sadeep Madurange

+
+
+
+ +
+
+
+

© ASCIIMX - 2025

+
+
+
+ + + + diff --git a/_site/blog/arduino-uno/pinout.png b/_site/blog/arduino-uno/pinout.png new file mode 100644 index 0000000..59acfbc Binary files /dev/null and b/_site/blog/arduino-uno/pinout.png differ -- cgit v1.2.3