From 8cbe75f0047732c865f58e2f847a5ffafe066e71 Mon Sep 17 00:00:00 2001
From: Sadeep Madurange <sadeep@asciimx.com>
Date: Sat, 20 Dec 2025 11:25:26 +0800
Subject: Change projects to poc and blog to log.

---
 _poc/my-first-pcb.md | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 _poc/my-first-pcb.md

(limited to '_poc/my-first-pcb.md')

diff --git a/_poc/my-first-pcb.md b/_poc/my-first-pcb.md
new file mode 100644
index 0000000..9a88243
--- /dev/null
+++ b/_poc/my-first-pcb.md
@@ -0,0 +1,64 @@
+---
+title: My first PCB
+date: 2025-07-14
+layout: post
+thumbnail: thumb_sm.jpeg
+---
+
+In 2023, I started tinkering with DIY electronics as a hobby. Until now, I've
+been using development boards like the Arduino Uno and ESP-32-WROOM so that I
+can focus on the software. Recently, I decided to step outside of my comfort
+zone and design a PCB from scratch for a door lock I'm working on.
+
+The lock comprises two subsystems: a fingerprint sensor in front of the door
+and a servo connected to the physical lock behind the door. The fingerprint
+sensor authenticates the person and signals the servo behind the door to unlock
+the door over an encrypted RF channel.
+
+<table style="border: none; width: 100%">
+  <tr style="border: none;">
+    <td style="border: none; width: 49.5%; vertical-align: top; text-align: center;">
+      <img src="front_design.jpeg" alt="Design (front)" style="width: 100%">
+      <p>Footprint (front)</p>
+    </td>
+    <td style="border: none; vertical-align: top; text-align: center;">
+      <img src="front.jpeg" alt="PCB (front)" style="width: 100%">
+      <p>PCB (front)</p>
+    </td>
+  </tr>
+  <tr style="border: none;">
+    <td style="border: none; width: 49.5%; vertical-align: top; text-align: center;">
+      <img src="back_design.jpeg" alt="Design (back)" style="width: 100%">
+      <p>Footprint (back)</p>
+    </td>
+    <td style="border: none; vertical-align: top; text-align: center;">
+      <img src="back.jpeg" alt="PCB (back)" style="width: 100%">
+      <p>PCB (back)</p>
+    </td>
+  </tr>
+</table>
+
+The PCBs have two layers. A copper region serves as the ground plane. The 0.3mm
+wide 1oz/ft<sup>2</sup> copper traces can carry up to 500mA (the tracks
+connecting the power source and the linear regulators have a width of 0.5mm).
+Both subsystems were functional. I was able to control the servo reliably using
+the fingerprint sensor.
+
+The designs aren't without flaws, however. The main shortcoming of the circuits
+is that they draw significant amounts of quiescent currents despite employing
+sleep modes. The linear regulators were a poor choice as they dissipate too
+much heat. The fingerprint sensor and the servo draw 13.8mA (3.3V) and 4.6mA
+(5V) respectively, as long as they are connected to the power supply. 
+
+Although the circuit didn't draw more than 200mA without a load, the servo
+under load could draw up to 600mA. I'm sailing too close to the wind with 0.3mm
+copper traces. Instead, 0.4mm wide 2oz/ft<sup>2</sup> traces would have been
+safer.
+
+I'm working on improving the design to reduce idle current consumption and
+extend the battery life. Despite its deficiencies, this was my first PCB
+design, and I'm glad that it worked as well as it did. Custom PCB design marks
+an important milestone in my DIY electronics journey.
+
+Files: [gerber_back.zip](gerber_back.zip), [gerber_front.zip](gerber_front.zip),
+       [source.tar.gz](source.tar.gz)
-- 
cgit v1.2.3