From a3a63e64d00a6554f935d574358c88afb453b09d Mon Sep 17 00:00:00 2001 From: Sadeep Madurange Date: Sat, 7 Jun 2025 14:26:01 +0800 Subject: FPM and the buttons. --- README.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 README.txt (limited to 'README.txt') diff --git a/README.txt b/README.txt new file mode 100644 index 0000000..be66f81 --- /dev/null +++ b/README.txt @@ -0,0 +1,17 @@ +CURRENT MEASUREMENTS + +R503 FPM: +ATmega328P: +MOSFET: + + +FS5106B high-torque servo: + +One of them draws 6.1mA when connected and stabilizes at 4.6mA. The other drew +variable amounts initially (4.7mA, 5mA+, but mostly 4.7). Both draw 4.6mA of +quiescent current with a 5.07V supply. + +REMARKS + + 1. Can't use the 3.3V FPM modules with Arduino Uno. The RX and TX lines have + resistors. -- cgit v1.2.3